Step-By-Step Guide To Getting Started With Get Fit Mining
I have taken my time to create this STEP-BY-STEP page for you FOR A REASON.
You need to follow it exactly and in the order in which I have everything laid out to avoid and unnecessary issues with your setup process.
Follow everything that I advise to do and you will have no issues.
Skip and jump and feel that you don’t need to listen and do your own thing and you are on your own.
STEP 1: Create a new Meta mask Wallet on your mobile phone.
Some of you may already have a MetaMask wallet but I have heard of many instances where some of you have had your MM wallet compromised by something you have done in the past.
Don’t take chances as it is simple and quick to create a new Metamask wallet so simply go ahead and do so ON YOUR PHONE.
SAFETY is key here so when creating your new MM account, DON’T use an easy password or a password you commonly use to avoid making it easy for you to be hacked.
Use a long and complicated password and WRITE IT DOWN in a book. It then becomes easy to retrieve your password if you ever forget it or when logging in.
Do the same and WRITE IT IN YOUR BOOK when it comes to your 12 word seed phrase.
AGAIN, it is extremely important to write this down OFFLINE and don’t store it on your phone or computer as it could be accessed if your phone/computer is ever compromised.
Not that it will happen but it is better to be safe than sorry.
Now that you know all the do’s and don’ts, use the video below as a guide to help create your new Metamask account.
https://youtu.be/Jp6NHQM-4CQ?si=BptvM41WXLCkip6z
The part of the video relevant to setup is from start to the 2:12 minute mark.
Step 2: Switch to the Avalanche network in Metamask
After you set up your wallet it will be on the Ethereum network by default. Get Fit Mining is currently on the AVALANCHE network.
You must therefore switch the networks in your Metamask wallet from the Etereum network to the Avalanche network. This is VERY IMPORTANT so do not miss this step.
The part of the video that shows you how to do this is from the 2:37 minute mark to the 3:05 minute mark.
This is the network that you want to add https://prnt.sc/xgd-MEPmbiFt
Normally when adding a new network Metamask asks you if you want to switch to this new network so simply switch to the Avalanche network one time as everything will be done this network.
You should now see the Avalanche symbol to the top left of your wallet indicating that you are on the correct network/mainnet ( see here:https://prnt.sc/HejOFFJs3Th8 )
Step 3: Add USDT (Avalanche) token to your Metamask wallet.
To do this, scroll down in your Metamask wallet a bit and click on IMPORT TOKEN.
In the search bar type in USDT and then check the box that says TETHER TOKEN USDT and click on NEXT
On your Tokens page in your wallet you should now see USDT showing up.
See here for all of these steps: https://prnt.sc/y86IJ2mvb8xI
Step 4: Add the MQT token to your Metamask wallet
In the same way as you did for USDT, click on IMPORT TOKENS but on the next page now click onCUSTOM TOKEN.
MQT is a custom token so you need to input the actual token address.
Where it says to input token contract address, copy this address below and paste it in and then click Next
MQT Token address: 0xef0cdae2ffeeefa539a244a16b3f46ba75b8c810
On the tokens page in your Metamask, you should now have the tokens AVAX, USDT and MQT.
All should show the red triangular Avalanche symbol showing that they are all on the Avalanche network.
If so, you have done everything correctly and are now ready to proceed.
See here for what everything looks like: https://prnt.sc/xOBx1p2uP4EO
Step 5: Purchase AVAX
One of the most critical steps in this entire setup is the purchase of AVAX.
AVAX will be used continuously for gas fees with GFM .
You also use it to swap into MQT within Metamask in order to purchase your Lenny miner(s) as well as to open up your docking positions if you plan on docking more than one miner.
You also swap it for USDT (Avalanche) within Metamask as well in order to evolve and merge your Lenny’s into higher powered miners (if you plan to do so
So as long as you can get AVAX into your Metamask wallet, you are all set as everything else is easily done within Metamask itself.
The challenge is figuring out how to get AVAX into your Metamask wallet and also how much of it you need.
A) How/Where to Purchase AVAX.
If you already have crypto in some form then you can simply swap this crypto using Simpleswap as indicated below.
You can also use EXODUS and do a swap of whatever crypto you have to AVAX and thns end this AVAX into your MM wallet
MAKE SURE it is AVAX on the AVALANCHE network though ( see here: https://prnt.sc/eKwvq18vsIRs )
If you need to purchase crypto though then you can buy AVAX directly from a centralized exchange like Binance, Kraken,Kucoin or any of the others. I believe you can also buy it on Coinbase.
If you don’t use any of the centralized exchanges then I suggest that an easy way would be to purchase BTC using CashApp (I believe there is a limit of $2000 in BTC a day so if you need more you just do so over 2-3 days) and then take this BTC and convert it to AVAX using Simpleswap
Here is a video on how to buy BTC with Cash App: https://youtu.be/ZWfJdmXl6KE?si=GcNS9EdicgN0wYEE
Simply go to https://simpleswap.io/ and input that you want to swap BTC into AVAX and fiddle with the amount of BTC to get you the correct number of AVAX.
AVAX is roughly around 26.50USD so if you were getting 7 Omegas you would need about 159 AVAX in total
See here: https://prnt.sc/jyzVVY1r70Nw
Here is a video that shows you the swapping process in Simpleswap: https://youtu.be/4U8KfwHNRIc?si=DD_N26usz7W5UGAx
B) How much AVAX to purchase
How much AVAX to purchase will depend on the amount of miners that you want to obtain as well as which powered miners you are looking to acquire.
The price of AVAX is not fixed so I cannot give you exact values of course but I can give you a pretty close estimate as of now if we use an AVAX value of $25
You must also remember that everyone starts in this ecosystem with the basic LENNY Miners.
These mine MQT at 50% capacity and cost $50 each.
You can have up to 7 miners working for you at once as long as you “unlock” all of the docking slots that will house your 7 miners. The cost for unlocking all 7 docks is roughly $180.
If you don’t plan on having 7 miners working for you at once, then you simply unlock the number of docks corresponding to the number of miners that you are starting with.
Also, this is the statistics and the cost breakdown of the higher powered miners:
PRIMARY miners (100% mining power) –To evolve from Lenny costs $30 for each miner
ULTRA miners (125% mining power) – To evolve from Primary costs $40 for each miner
ALPHA miners (175% mining power) – To evolve from Ultra costs $60 for each miner
OMEGA miners (300% mining power) – You need to merge 2 ALPHA miners into 1 Omega miner and the total cost for doing so is currently $200 (discounted by $40 until the rebranding).
See here: https://prnt.sc/miuSc3g2Jbua
You cannot buy any of the higher powered miners directly. Everyone starts with Lenny’s and evolve and merge their way up to the higher powered miners based on their preference and monetary capabilities.
This is the built in ecosystem and is part of the process by which the self sustaining ecosystem (that stabilizes the price of MQT in the markets) works.
Finally, because this project is currently operating on the Avalanche blockchain, everything requires a transaction fee (albeit small) so you must also cater for having a bit of extra AVAX to cover your current and future transaction fees.
See here: https://prnt.sc/n0zdfQhRwLLn
Knowing all of this, let’s try to put a price to everything to give you some guidance using an AVAX value of $25 and an MQT value of $40
1 Lenny - $50 + $25 needed in AVAX = $75
2 Lenny’s - $100 + $10 to open your second dock + $40 in AVAX = $150
3 Lenny’s - $150 + $30 to open 3 dock + $45 in AVAX = $225
4 Lenny’s - $200 + $55 to open 4 dock + $45 in AVAX = $300
5 Lenny’s - $250 + $85 to open 5 dock + $65 in AVAX = $400
6 Lenny’s - $300 + $120 to open 5 dock + $80 in AVAX = $500
7 Lenny’s - $350 + $180 to open 5 dock + $70 in AVAX = $600
7 Primaries – upgrade each Lenny at a cost of $30 each= $600 + $210 = $810 ( call it $825)
7 Ultras – Upgrade each Primary at a cost of $40 each = $825 + $280 = $1105 (call it $1100).
7 Alphas – Upgrade each Ultra to an Alpha at the cost of $60 each = $1100 + $420 = $1420 (Call it $1500)
7 Omegas – You need to merge 2 ALPHA’s to make 1 Omega which means that you need 14 Lenny’s to start with and evolve 14 Lenny’s all the way up to Alpha’s and then merge 2 Alpha’s together to make 1 Omega at the cost of $200 for each merge.
$1500 x 2 = $3000 + $1400 = $4400
This will give you 7 of the most powerful miners in the ecosystem plus enough AVAX to get everything done and for future transactions as well.
From the above, you can decide which price point suits you and as such, which miners you can expect to get for that price.
Get in where you feel comfortable but GET IN.
Step 6: Sending your AVAX into Metamask
Regardless of which route you choose to obtain your AVAX, once you have it, you need to be able to send it into your Metamask wallet.
To do so, you would first need to copy your AVAX receiving wallet address from within your Metamask wallet so you need to know where to look for this.
Once you log in, it is right at the top. See here: https://prnt.sc/tBCZMOvjYeu-
You then go to where ever you have the AVAX ready to send and send it to this address that you just copied and it will show up in your Metamask wallet once sent.
Step 7 :Converting your AVAX into USDT and MQT
This step is important and all of this should be done before you even get started with GFM so that everything runs smoothly.
Based on the estimates that I have shared above, you would need to determine your starting point as to the total amount of AVAX needed and this is what you should now have in your Metamask wallet.
What now needs to be understood is as follows:
- Purchasing Lenny’s requires MQT
- Unlocking Docks to house your Miners requires MQT
- Evolving and merging requires USDT (Avalanche)
Once you understand and make this distinction between what needs to be purchased with MQT and what needs to be purchased with USDT, then you can figure out how much of your AVAX to swap into each token.
A) Determine the amount of Lenny's you will be starting with
So figure out the number of Lenny’s you are starting with. Each Lenny is $50 (worth of MQT) and then look at the current price of MQT and then work out how much MQT you need.
See here:
https://dexscreener.com/avalanche/0x98240fef612ecfd84830b210a544e9a906c48199)
Consider how many docks you have to open and then take and then take that value and again calculate it in terms of MQT as it is the MQT equivalent of the cost that is needed.
Here are the costs associated with unlocking of each dock https://prnt.sc/FDdt_NppoyGo
Once you have your figure for the amount of MQT that you need, then you simply need to SWAP some AVAX for this amount of MQT within Metamask.
Click the SWAP button in Metamask, select AVAX as the top token and then select the MQT token as the token to be swapped into , work out how much AVAX you need to swap to get the right amount of MQT (do some math as you need to know the AVAX price and MQT price) and then just carry through with the swap.
Your AVAX will be deducted from your token amount and your MQT will be added. It takes a little while to show up but if you want to see it right away, simply close your Metamask app and open it up again.
See here for the visuals: https://prnt.sc/CNaXdw0T0OZm
B)Determine the amount of USDT you need to be able to evolve/merge
To swap for your USDT you do the exact same thing except this time you are swapping from AVAX to USDT.
Here are the visuals: https://prnt.sc/JwL8EII12fX0
At this time, you now have your Metamask wallet with AVAX (for all of the various transaction fees that you need – current and future),MQT (to purchase your Lenny’s and unlock your docking slots) and USDT (to evolve and merge Lenny’s into higher powered miners/ Omegas).
You are NOW ready to get started with Get Fit Mining /Move Quest .
Step 8: ACTIVATION of your Get Fit Mining Account.
-COPY my Activation link below:
https://getfitmining.com/start/0x808f96Bc599974e6f5874Dd758f7B7E67fd04754
---- If you are using your phone, Log into your Metamask wallet and click on the second button from the right ( see here: https://prnt.sc/6qcAqYfU-EV_)
This will take you to the Dapp browser and then at the top, paste in my ACTIVATION code an click on return/enter.
See here: https://prnt.sc/5aJNIhLDhIpO
--- If somehow you are doing this from your desktop then simply go to https://getfitmining.com/start , connect your Metamask wallet and proceed.
You should now see the GFM start page and it’s time to follow the steps.
The first step is to connect your Metamask wallet so click on connect and then your wallet address should show as connected.
Under that in step 2, you should see my activation code which should show this code ending in 754
Like this:
Once you see this, click on SAVE and your account would then be activated as well and you will see your own activation code below.
Step 9: Setting up your Get Fit Mining App
There is no need for step 3 as you already bought your MQT and have it already in your Metamask wallet so you are ready for the following:
-Purchase your Lenny’s
- Evolve your miners ( if you are upgrading to higher powered miners )
- Unlocking your Docking slots
- Docking your miners
-Funding your internal GFM wallet
-Downloading your GFM App FROM THE App store.
To do so, it is best to watch a video training on how this is done.
Watch this video starting at the 6:13 minute mark to get everything else set up:
https://youtu.be/tEUfG7zxhIk?si=F_56EPgVQnSg83Tc&t=373
STEP 10 : NOTES
A) TAKE YOUR TIME with each of these steps and remember that each step requires a transaction to be confirmed so once you allow or craft or evolve etc, WAIT at least about 15 seconds (or until the transaction shows as confirmed) before moving on.
If you try to rush it, errors may occur. Take your time and remain focused and everything will be fine.
B). Remember that you need to repeat certain steps a certain number of times depending on how many Lenny’s you are trying to purchase , how many docs you are unlocking and how many miners you are evolving/merging.
C) It’s definitely a process BUT you only need to do it one.
D) Follow the steps exactly so that you do not run into unnecessary issues as everything works flawlessly if you simply take your time and follow the steps.
I’ll create another guide that will help with configuring /using/submitting/ claiming within your GFM app itself but first you must set up all of the above.